1. Visual Inspection
Each pump is examined for external damage, cracks, and signs of wear on the body and components. Cosmetic issues and potential safety concerns are noted for further action.
Refurbished Alaris Medsystem III 2865 Infusion IV Pump
In stock
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
- Three independent infusion channels in one compact multi-channel pump
- 0.1–999 mL/h overall flow-rate range per channel • 0.1–9999 mL volume range • KVO 0.1–20 mL/h
- Advanced Dose Rate Calculator • customizable Drug List Editor • six configurable Device Types
Refurbished Alaris MedSystem III 2865 Infusion IV Pump
Refurbished • 1-Year Warranty • Three-channel MedSystem III infusion pump with Advanced Dose Rate Calculation and Drug List Editor
The Alaris MedSystem III 2865 is a compact, multi-channel infusion pump that combines three independent fluid-delivery channels in a single device. Each channel can be programmed independently, allowing multiple infusions to be delivered to one patient while reducing bedside equipment and simplifying patient transport.
What’s Included
- 1× Alaris MedSystem III Infusion Pump, Model 2865
Product Description
The MedSystem III 2865 provides three independently programmable infusion channels in a portable unit weighing approximately 5.1 pounds with the pole clamp. It supports continuous and intermittent delivery of fluids, medications, blood, and blood products through clinically appropriate routes of administration.
The pump includes an Advanced Dose Rate Calculator that calculates a volumetric or dose rate from entered patient weight, drug concentration, diluent volume, and dosing parameters. Its Drug List Editor allows the drug list to be customized using compatible Drug List Editor software, while the DRUG? option supports calculations for drugs not listed in the pump or for alternative dosing regimens.
Six configurable Device Types allow rate limits, volume limits, pressure settings, KVO behavior, and air-in-line thresholds to be adapted for different clinical applications. Actual programmed limits may therefore vary according to the individual pump configuration.
- Three independent infusion channels
- Overall delivery-rate range of 0.1–999 mL/h per channel
- Volume range of 0.1–9999 mL per channel
- Primary and sequential secondary infusion programming
- Automatic return to the primary infusion when secondary volume reaches zero
- Advanced Dose Rate Calculator
- Customizable Drug List Editor with DRUG? programming option
- Six configurable Device Types
- 20–60 cc syringe-container capability with appropriate MedSystem III setup
- RS-232 communications interface
- Cassette-based free-flow protection
Specifications — Alaris MedSystem III 2865
| Manufacturer | CareFusion / Alaris |
| Model | 2865 — MedSystem III |
| Type | Three-channel multi-channel infusion pump |
| Infusion Channels | 3 independent fluid-delivery channels |
| Intended Populations | Adults, pediatrics, and neonates in professional healthcare and home-care environments, subject to applicable clinical policies and manufacturer instructions |
| Fluids / Therapies | Designed for delivery of fluids, medications, blood, and blood products using continuous or intermittent delivery |
| Delivery Routes | Clinically acceptable routes including intravenous, intra-arterial, subcutaneous, epidural, enteral, and irrigation of fluid spaces, when used according to manufacturer instructions |
| Dimensions | 7.875″ H × 6″ W × 2.10″ D (20.00 × 15.24 × 5.33 cm) |
| Weight | Approximately 5.1 lb (2.3 kg), including pole clamp |
| Flow Rate Range | 0.1–999 mL/h per channel overall; active rate limits can vary according to selected Device Type and configuration |
| Volume Range | 0.1–9999 mL per channel |
| KVO Rate Range | 0.1–20.0 mL/h overall; configured KVO behavior may vary by Device Type |
| System Accuracy | ±5% from 1.0–999 mL/h and ±10% from 0.1–0.9 mL/h under manufacturer-specified test conditions |
| Primary Infusion | Can be programmed for a specified infusion rate or delivery period |
| Secondary Infusion | Supports two different infusion rates sequentially; when secondary volume remaining reaches zero, the primary infusion resumes automatically |
| Dose Rate Calculator | Calculates volumetric or dose rate using patient weight, drug concentration, drug amount, diluent volume, and dosing parameters |
| Drug List Editor | Drug list can be customized using compatible Drug List Editor software; available drug names and dosing parameters depend on the individual pump configuration |
| DRUG? Programming | Supports calculation for a drug not listed in the pump or for an alternative dosing regimen |
| Device Types | General Purpose, Neonatal, Controller Pressure, Operating Room, General Purpose II, and Operating Room II |
| Air-in-Line Detection | Air-in-line sensor on each channel; factory/default threshold is 500 µL except Neonatal Device Type at 50 µL, subject to configuration |
| Occlusion Pressure | Default maximum 15 psi for most Device Types; Controller Pressure uses a 3 ft H₂O maximum. Settings may be modified by qualified personnel using Field Maintenance Software. |
| Syringe Delivery | Accommodates 20 cc to 60 cc syringes when used with the appropriate MedSystem III administration setup |
| Administration Sets | Use only dedicated MedSystem III administration sets as specified by the manufacturer |
| Free-Flow Protection | Administration-set cassette incorporates a slide clamp that occludes the tubing when the cassette is removed and the clamp is fully extended |
| Communications | COMM receptacle supports RS-232 communications for compatible clinical monitoring, configuration, and maintenance systems |
| Main Battery | Rechargeable NiCd battery pack |
| Memory Backup Battery | Nonrechargeable lithium battery |
| Battery Runtime | Minimum approximately 6 hours with all three channels operating at 125 mL/h and backlight usage of approximately 2 minutes per hour, using a fully charged battery under manufacturer-specified conditions |
| Power Consumption | 6 W AC |
| AC Power Requirements | 90–132 VAC • 47–63 Hz |
| Compatible AC Adapters | Manufacturer documentation specifies Models 1555, 1565, and 1560A; Model 1565C is also documented as compatible with previously released MedSystem III pumps |
| Model 1555 Adapter | 7.5 VDC at 1 A • approximately 10 ft cord |
| Model 1560A Adapter | 7.5 VDC at 1.65 A • approximately 10.5 ft cord |
| Model 1565C Adapter | 7.5 VDC at 1.7 A • approximately 10 ft cord • medical-grade double-insulated adapter |
| External Power Connection | 6–9 V external-power receptacle with connector retaining clip |
| Operating Temperature | 50–104°F (10–40°C) |
| Transport / Storage Temperature | -4–131°F (-20–55°C); storage below 95°F (35°C) is recommended for optimum battery life |
| Ingress Protection | IPX1 — drip-proof |
| Case Material | Impact-resistant polycarbonate / ABS alloy |
| Standards | UL 544 • CSA C22.2 No. 125 |
| Configuration | Drug list, Device Type parameters, rate and volume limits, pressure settings, KVO, air-in-line thresholds, communications functions, and other options may vary according to the individual pump configuration |
| Condition | Refurbished |
| Warranty | 1-Year United Infusion warranty |
Product Manuals
Download the MedSystem III Model 2865 User Manual for operating instructions, primary and secondary infusion programming, Advanced Dose Rate Calculator operation, Drug List Editor information, Device Types, alarms, configuration, technical specifications, maintenance, and safety precautions.
MedSystem III Infusion Pump Model 2865 — User Manual
Download PDF
In stock
Fully Refurbished
1-Year Warranty
Biomed Tested & Calibrated
Complete Working System
- Three independent infusion channels in one compact multi-channel pump
- 0.1–999 mL/h overall flow-rate range per channel • 0.1–9999 mL volume range • KVO 0.1–20 mL/h
- Advanced Dose Rate Calculator • customizable Drug List Editor • six configurable Device Types
Refurbished Alaris MedSystem III 2865 Infusion IV Pump
Refurbished • 1-Year Warranty • Three-channel MedSystem III infusion pump with Advanced Dose Rate Calculation and Drug List Editor
The Alaris MedSystem III 2865 is a compact, multi-channel infusion pump that combines three independent fluid-delivery channels in a single device. Each channel can be programmed independently, allowing multiple infusions to be delivered to one patient while reducing bedside equipment and simplifying patient transport.
What’s Included
- 1× Alaris MedSystem III Infusion Pump, Model 2865
Product Description
The MedSystem III 2865 provides three independently programmable infusion channels in a portable unit weighing approximately 5.1 pounds with the pole clamp. It supports continuous and intermittent delivery of fluids, medications, blood, and blood products through clinically appropriate routes of administration.
The pump includes an Advanced Dose Rate Calculator that calculates a volumetric or dose rate from entered patient weight, drug concentration, diluent volume, and dosing parameters. Its Drug List Editor allows the drug list to be customized using compatible Drug List Editor software, while the DRUG? option supports calculations for drugs not listed in the pump or for alternative dosing regimens.
Six configurable Device Types allow rate limits, volume limits, pressure settings, KVO behavior, and air-in-line thresholds to be adapted for different clinical applications. Actual programmed limits may therefore vary according to the individual pump configuration.
- Three independent infusion channels
- Overall delivery-rate range of 0.1–999 mL/h per channel
- Volume range of 0.1–9999 mL per channel
- Primary and sequential secondary infusion programming
- Automatic return to the primary infusion when secondary volume reaches zero
- Advanced Dose Rate Calculator
- Customizable Drug List Editor with DRUG? programming option
- Six configurable Device Types
- 20–60 cc syringe-container capability with appropriate MedSystem III setup
- RS-232 communications interface
- Cassette-based free-flow protection
Specifications — Alaris MedSystem III 2865
| Manufacturer | CareFusion / Alaris |
| Model | 2865 — MedSystem III |
| Type | Three-channel multi-channel infusion pump |
| Infusion Channels | 3 independent fluid-delivery channels |
| Intended Populations | Adults, pediatrics, and neonates in professional healthcare and home-care environments, subject to applicable clinical policies and manufacturer instructions |
| Fluids / Therapies | Designed for delivery of fluids, medications, blood, and blood products using continuous or intermittent delivery |
| Delivery Routes | Clinically acceptable routes including intravenous, intra-arterial, subcutaneous, epidural, enteral, and irrigation of fluid spaces, when used according to manufacturer instructions |
| Dimensions | 7.875″ H × 6″ W × 2.10″ D (20.00 × 15.24 × 5.33 cm) |
| Weight | Approximately 5.1 lb (2.3 kg), including pole clamp |
| Flow Rate Range | 0.1–999 mL/h per channel overall; active rate limits can vary according to selected Device Type and configuration |
| Volume Range | 0.1–9999 mL per channel |
| KVO Rate Range | 0.1–20.0 mL/h overall; configured KVO behavior may vary by Device Type |
| System Accuracy | ±5% from 1.0–999 mL/h and ±10% from 0.1–0.9 mL/h under manufacturer-specified test conditions |
| Primary Infusion | Can be programmed for a specified infusion rate or delivery period |
| Secondary Infusion | Supports two different infusion rates sequentially; when secondary volume remaining reaches zero, the primary infusion resumes automatically |
| Dose Rate Calculator | Calculates volumetric or dose rate using patient weight, drug concentration, drug amount, diluent volume, and dosing parameters |
| Drug List Editor | Drug list can be customized using compatible Drug List Editor software; available drug names and dosing parameters depend on the individual pump configuration |
| DRUG? Programming | Supports calculation for a drug not listed in the pump or for an alternative dosing regimen |
| Device Types | General Purpose, Neonatal, Controller Pressure, Operating Room, General Purpose II, and Operating Room II |
| Air-in-Line Detection | Air-in-line sensor on each channel; factory/default threshold is 500 µL except Neonatal Device Type at 50 µL, subject to configuration |
| Occlusion Pressure | Default maximum 15 psi for most Device Types; Controller Pressure uses a 3 ft H₂O maximum. Settings may be modified by qualified personnel using Field Maintenance Software. |
| Syringe Delivery | Accommodates 20 cc to 60 cc syringes when used with the appropriate MedSystem III administration setup |
| Administration Sets | Use only dedicated MedSystem III administration sets as specified by the manufacturer |
| Free-Flow Protection | Administration-set cassette incorporates a slide clamp that occludes the tubing when the cassette is removed and the clamp is fully extended |
| Communications | COMM receptacle supports RS-232 communications for compatible clinical monitoring, configuration, and maintenance systems |
| Main Battery | Rechargeable NiCd battery pack |
| Memory Backup Battery | Nonrechargeable lithium battery |
| Battery Runtime | Minimum approximately 6 hours with all three channels operating at 125 mL/h and backlight usage of approximately 2 minutes per hour, using a fully charged battery under manufacturer-specified conditions |
| Power Consumption | 6 W AC |
| AC Power Requirements | 90–132 VAC • 47–63 Hz |
| Compatible AC Adapters | Manufacturer documentation specifies Models 1555, 1565, and 1560A; Model 1565C is also documented as compatible with previously released MedSystem III pumps |
| Model 1555 Adapter | 7.5 VDC at 1 A • approximately 10 ft cord |
| Model 1560A Adapter | 7.5 VDC at 1.65 A • approximately 10.5 ft cord |
| Model 1565C Adapter | 7.5 VDC at 1.7 A • approximately 10 ft cord • medical-grade double-insulated adapter |
| External Power Connection | 6–9 V external-power receptacle with connector retaining clip |
| Operating Temperature | 50–104°F (10–40°C) |
| Transport / Storage Temperature | -4–131°F (-20–55°C); storage below 95°F (35°C) is recommended for optimum battery life |
| Ingress Protection | IPX1 — drip-proof |
| Case Material | Impact-resistant polycarbonate / ABS alloy |
| Standards | UL 544 • CSA C22.2 No. 125 |
| Configuration | Drug list, Device Type parameters, rate and volume limits, pressure settings, KVO, air-in-line thresholds, communications functions, and other options may vary according to the individual pump configuration |
| Condition | Refurbished |
| Warranty | 1-Year United Infusion warranty |
Product Manuals
Download the MedSystem III Model 2865 User Manual for operating instructions, primary and secondary infusion programming, Advanced Dose Rate Calculator operation, Drug List Editor information, Device Types, alarms, configuration, technical specifications, maintenance, and safety precautions.
MedSystem III Infusion Pump Model 2865 — User Manual
Download PDF
- Three independent infusion channels in one compact multi-channel pump
- 0.1–999 mL/h overall flow-rate range per channel • 0.1–9999 mL volume range • KVO 0.1–20 mL/h
- Advanced Dose Rate Calculator • customizable Drug List Editor • six configurable Device Types
Refurbished Alaris MedSystem III 2865 Infusion IV Pump
Refurbished • 1-Year Warranty • Three-channel MedSystem III infusion pump with Advanced Dose Rate Calculation and Drug List Editor
The Alaris MedSystem III 2865 is a compact, multi-channel infusion pump that combines three independent fluid-delivery channels in a single device. Each channel can be programmed independently, allowing multiple infusions to be delivered to one patient while reducing bedside equipment and simplifying patient transport.
What’s Included
- 1× Alaris MedSystem III Infusion Pump, Model 2865
Product Description
The MedSystem III 2865 provides three independently programmable infusion channels in a portable unit weighing approximately 5.1 pounds with the pole clamp. It supports continuous and intermittent delivery of fluids, medications, blood, and blood products through clinically appropriate routes of administration.
The pump includes an Advanced Dose Rate Calculator that calculates a volumetric or dose rate from entered patient weight, drug concentration, diluent volume, and dosing parameters. Its Drug List Editor allows the drug list to be customized using compatible Drug List Editor software, while the DRUG? option supports calculations for drugs not listed in the pump or for alternative dosing regimens.
Six configurable Device Types allow rate limits, volume limits, pressure settings, KVO behavior, and air-in-line thresholds to be adapted for different clinical applications. Actual programmed limits may therefore vary according to the individual pump configuration.
- Three independent infusion channels
- Overall delivery-rate range of 0.1–999 mL/h per channel
- Volume range of 0.1–9999 mL per channel
- Primary and sequential secondary infusion programming
- Automatic return to the primary infusion when secondary volume reaches zero
- Advanced Dose Rate Calculator
- Customizable Drug List Editor with DRUG? programming option
- Six configurable Device Types
- 20–60 cc syringe-container capability with appropriate MedSystem III setup
- RS-232 communications interface
- Cassette-based free-flow protection
Specifications — Alaris MedSystem III 2865
| Manufacturer | CareFusion / Alaris |
| Model | 2865 — MedSystem III |
| Type | Three-channel multi-channel infusion pump |
| Infusion Channels | 3 independent fluid-delivery channels |
| Intended Populations | Adults, pediatrics, and neonates in professional healthcare and home-care environments, subject to applicable clinical policies and manufacturer instructions |
| Fluids / Therapies | Designed for delivery of fluids, medications, blood, and blood products using continuous or intermittent delivery |
| Delivery Routes | Clinically acceptable routes including intravenous, intra-arterial, subcutaneous, epidural, enteral, and irrigation of fluid spaces, when used according to manufacturer instructions |
| Dimensions | 7.875″ H × 6″ W × 2.10″ D (20.00 × 15.24 × 5.33 cm) |
| Weight | Approximately 5.1 lb (2.3 kg), including pole clamp |
| Flow Rate Range | 0.1–999 mL/h per channel overall; active rate limits can vary according to selected Device Type and configuration |
| Volume Range | 0.1–9999 mL per channel |
| KVO Rate Range | 0.1–20.0 mL/h overall; configured KVO behavior may vary by Device Type |
| System Accuracy | ±5% from 1.0–999 mL/h and ±10% from 0.1–0.9 mL/h under manufacturer-specified test conditions |
| Primary Infusion | Can be programmed for a specified infusion rate or delivery period |
| Secondary Infusion | Supports two different infusion rates sequentially; when secondary volume remaining reaches zero, the primary infusion resumes automatically |
| Dose Rate Calculator | Calculates volumetric or dose rate using patient weight, drug concentration, drug amount, diluent volume, and dosing parameters |
| Drug List Editor | Drug list can be customized using compatible Drug List Editor software; available drug names and dosing parameters depend on the individual pump configuration |
| DRUG? Programming | Supports calculation for a drug not listed in the pump or for an alternative dosing regimen |
| Device Types | General Purpose, Neonatal, Controller Pressure, Operating Room, General Purpose II, and Operating Room II |
| Air-in-Line Detection | Air-in-line sensor on each channel; factory/default threshold is 500 µL except Neonatal Device Type at 50 µL, subject to configuration |
| Occlusion Pressure | Default maximum 15 psi for most Device Types; Controller Pressure uses a 3 ft H₂O maximum. Settings may be modified by qualified personnel using Field Maintenance Software. |
| Syringe Delivery | Accommodates 20 cc to 60 cc syringes when used with the appropriate MedSystem III administration setup |
| Administration Sets | Use only dedicated MedSystem III administration sets as specified by the manufacturer |
| Free-Flow Protection | Administration-set cassette incorporates a slide clamp that occludes the tubing when the cassette is removed and the clamp is fully extended |
| Communications | COMM receptacle supports RS-232 communications for compatible clinical monitoring, configuration, and maintenance systems |
| Main Battery | Rechargeable NiCd battery pack |
| Memory Backup Battery | Nonrechargeable lithium battery |
| Battery Runtime | Minimum approximately 6 hours with all three channels operating at 125 mL/h and backlight usage of approximately 2 minutes per hour, using a fully charged battery under manufacturer-specified conditions |
| Power Consumption | 6 W AC |
| AC Power Requirements | 90–132 VAC • 47–63 Hz |
| Compatible AC Adapters | Manufacturer documentation specifies Models 1555, 1565, and 1560A; Model 1565C is also documented as compatible with previously released MedSystem III pumps |
| Model 1555 Adapter | 7.5 VDC at 1 A • approximately 10 ft cord |
| Model 1560A Adapter | 7.5 VDC at 1.65 A • approximately 10.5 ft cord |
| Model 1565C Adapter | 7.5 VDC at 1.7 A • approximately 10 ft cord • medical-grade double-insulated adapter |
| External Power Connection | 6–9 V external-power receptacle with connector retaining clip |
| Operating Temperature | 50–104°F (10–40°C) |
| Transport / Storage Temperature | -4–131°F (-20–55°C); storage below 95°F (35°C) is recommended for optimum battery life |
| Ingress Protection | IPX1 — drip-proof |
| Case Material | Impact-resistant polycarbonate / ABS alloy |
| Standards | UL 544 • CSA C22.2 No. 125 |
| Configuration | Drug list, Device Type parameters, rate and volume limits, pressure settings, KVO, air-in-line thresholds, communications functions, and other options may vary according to the individual pump configuration |
| Condition | Refurbished |
| Warranty | 1-Year United Infusion warranty |
Product Manuals
Download the MedSystem III Model 2865 User Manual for operating instructions, primary and secondary infusion programming, Advanced Dose Rate Calculator operation, Drug List Editor information, Device Types, alarms, configuration, technical specifications, maintenance, and safety precautions.
MedSystem III Infusion Pump Model 2865 — User Manual
Download PDF
Refurbishing Process
At United Infusion, we follow a comprehensive refurbishing process for infusion pumps to help ensure they operate safely and reliably. This process follows manufacturer guidelines and sanitation standards to meet high quality expectations.
Below are the key steps of our refurbishing process:
2. Disassembly
The pump is carefully disassembled to access internal components, including the motor, gears, tubing pathways, and electronics. All parts are handled with care to avoid added damage.
3. Cleaning & Sanitization
Appropriate disinfectants are used to thoroughly clean all parts and remove residual fluids, blood, or debris. This step follows sanitation standards to help ensure the device is free from contaminants.
4. Component Inspection & Replacement
Individual parts, including the motor, battery, display screen, buttons, and connectors, are inspected for wear, damage, or malfunction. Worn or damaged components are replaced with manufacturer-approved parts.
5. Calibration & Software Update
The pump is adjusted to support accurate fluid delivery rates using standardized testing methods, and calibration is verified against manufacturer specifications. The latest compatible software version is then installed to improve functionality.
6. Testing, Reassembly & Final Check
The pump goes through functional testing, including alarms, flow rate accuracy, occlusion detection, and bolus delivery. It is then reassembled, connections are checked, and a final visual and functional inspection is completed to confirm it meets safety standards and customer requirements.
"We needed our syringe pumps serviced for scheduled maintenance to continue to provide safe care. In the past, we had to send them off with a 6 weeks turn around time. Then we found United Infusion. 30 min down the road, 24 hr turn around and 30 minutes down the road. We are extremely grateful!!!"
Need a quote, service help, or a similar model?
United Infusion supports equipment sales, repair, and rentals. Our team can help match the right unit, answer product questions, and support your equipment needs.